- 24-Cage Rack Dimensions – 77.5” W x 24”D x 75” H
- Cage Dimensions – 11” W x 15”D x 12” H
- 1.1 sq. ft. floor
- PVC Coated Wire – Part # – PC24-11X15X12-PVC
- Stainless Steel Wire – Part # – PC24-11X15X12-SS
IMPORTANT: INITIAL CLEANING
All components of this Alternative Design stainless steel product must be cleaned, sanitized and sterilized, where applicable, prior to being put into service. PVC coated wire cleaning – PVC coated wire may be heated up to 180 degrees F or 82 degrees C for cleaning and disinfecting. This unit is made primarily of 304 stainless steel. Use care when cleaning to prevent corrosion that can shorten useful life. Cleaning solutions which contain high levels of chlorine are not recommended for stainless steel parts.
Caster Maintenance
Caster used on this equipment was chosen for its suitability in applications where frequent washdowns are necessary. It is also well suited for applications exposed to heat, cleaning agents, steam, caustic solutions or other corrosive agents, which could cause rust and contamination. After washing and/or autoclaving, check casters for proper operation. Check the axle nut to ensure it is still tight (125 inch/pound is recommended). If the axle and/or swivel bearing has to be lubricated, use a high temp grease.