TWINCORE TECHNOLOGY IN A DEMOCRATIZED VERSION
IKKII features 2 independent compressor systems each capable of maintaining -82C.
Its pull down and pull up times are remarkable as well as its energy efficiency.
IKKII ultra-low freezers are designed for -86°C storage of high-value samples. Prefect for critical material storage in bio-repositories, medical research facilities, BSL4 labs, hospitals…
TwinCore© Technology employ 2 optimized autocascade compressors. However it only requires one compressor to hold temperature up to -82.
Because it has two complete and separate refrigeration systems, unlike the leading brand competitor’s system, it has true backup and will maintain set point up to -82 at all-time and not only -60 for couple of hours. The second will act as a backup. Energy usage is also dramatically reduced.
Standard ultra-low freezers rely on a cascade refrigeration system. If this system fails, the freezer and your samples have to be removed in couple of hours. LN2 or CO2 backups only sustain temperatures for approximately 7 hours, and require routine re-filling, maintenance & supervision.
In case of failure, your TwinCore ULT can be on site serviced without compromising or having to remove your precious samples, since it will stay at -82ºC at all time! IKKII ULT Freezers offer the Best Cooling Rate in the industry: Only about 3H to reach -82ºC from an ambient room temperature +22ºC, and also provides an outstanding door opening recovery rates and consistent temperature uniformity.
Z-SC1 innovative insulation with Automatic High Pressure Faoming under Vacuum (AHPF-VIP) brings you to the next level of sample protection with 11.5H pull up temperature to -20ºC, this equals to a LN2 or CO2 Back-up system at no cost.
IKKII ULT Freezers are Green, from insulation and an environmentally friendly mix of natural refrigerants, to an energy-saving mode option.
WORLD’S LOWEST NOISE LEVEL
WhisperFreeze@ Patented Technology provides the lowest noise level* in the world with quiet running fans & very low gas system pressures.
*Registered according NEN-EN-ISO 11202
BEST ENERGY EFFICIENCY, LOWEST HEAT & CO2 REJECTION WITH FASTEST PULL DOWN & RECOVERY
Extremely high insulation performance and 11% more energy efficient than leading brand!
PATENTED PERFECT SEALING
Unique insulation can keep integrity of content in case of a power failure for almost 12H, no CO2 Back-Up required
Seal-1 System® sealing technology
3 separate gaskets prevents ice build-up and ensures tight door seal closure. Insulated inner HDPE doors. This complete insulation system prevents any cool air from escaping and makes it very energy efficient with the best uniformity .
|Exterior Dimensions (W x D x H inches):||78 x 36 x 38|
|Interior Dimensions (W x D x H inches):||51 x 23.5 x 25|